Intec CS4000 User Manual page 130

Table of setting items in the device setup screen
Item
SMR Setting
1
2
BG Setting
3
Drum Cleaning
Transfer Roller Cleaning
4
High Humid Mode
Moisture Control
5
Narrow Paper Speed
Print Mode
z Shaded areas are factory-set values.
Details
0 Compensates for print results variation due to
+1 differences in the temperature and humidity
+2 environments, print density, and print frequency.
+3 Changes the settings if there is burr in the image.
-3
-2
-1
0 Compensates for print results variation due to
+1 differences in the temperature and humidity
+2 environments, print density, and print frequency.
+3 Change the value if the underlay is dark.
-3
-2
-1
On Sets whether to implement drum cleaning before
Off printing. The image quality may be improved.
Execute Implements cleaning of the transfer roller unit.
Mode1 Set if the paper curl after printing is conspicuous.
Mode2 Try mode 2 if reduced paper curl effects are not
Off obtained after settings mode 1.
Setting mode 1 or mode 2 will increase the warm-
up time and reduce the print speed.
On Sets whether or not to implement condensation
Off control.
If [On], completing the printing of 1 page may
take time.
Normal Sets the speed when printing on narrow paper.
Slow
Normal Automatically switches the printing speed
Slow according to the usage conditions of the printer
to avoid toner peeling.
Not switch if [Normal] is selected.
- 248 -
Item
Transfer Cyan Transfer Setting 0
Setting +1
+2
+3
-3
-2
-1
Magenta Transfer Setting 0
+1
+2
+3
-3
-2
-1
Yellow Transfer Setting 0
+1
+2
+3
-3
-2
-1
Black Transfer Setting 0
+1
+2
+3
-3
-2
-1
White Transfer Setting *1 0
+1
+2
*1: Displayed when [Admin
+3
Setup]>[Color Setup]>[Spot
-3
Color] is set to [White] on the
-2
control panel for CS5000.
-1
*1
Clear Transfer Setting 0
+1
+2
*1: Displayed when [Admin
+3
Setup]>[Color Setup]>[Spot
-3
Color] is set to [Clear] on the
-2
control panel for CS5000.
-1
Table of setting items in the device setup screen
z Shaded areas are factory-set values.
Details
Lower the setting value if lateral-stripe white dots
appear for cyan, green and blue toner.
Raise the setting value if lateral-stripe dark dots
appear for cyan toner.
Lower the setting value if lateral-stripe white dots
appear for magenta and red toner.
Raise the setting value if lateral-stripe dark dots
appear for magenta toner.
Lower the setting value if lateral-stripe white dots
appear for yellow toner.
Raise the setting value if lateral-stripe dark dots
appear for yellow toner.
Lower the setting value if lateral-stripe white dots
appear for black toner.
Raise the setting value if lateral-stripe dark dots
appear for black toner.
Lower the setting value if lateral-stripe white dots
appear for white toner.
Lower the setting value if lateral-stripe white dots
appear for clear toner.
- 249 -
1
2
3
4
5