Intec CS4000 User Manual page 80

Windows utilities
Adding printers
You can change the printer destination port to
1
LPR port.
Note
z You cannot set a printer that is already registered in the
Direct Network Printing Utility (LPR). To change the port,
select "Reset printer".
2
1
Select [Add Printer] from the [Remote
Print] menu.
3
4
2
Select the printer name to be added
using [Printer Name], and enter the
5 printer IP address in [IP Address] and
click [OK].
Note
z Displayed in [Printer Name] only if the printer drivers
have been added to the [Devices and printers] folder. Not
displayed if set in the network printers.
Memo
z You can also click [Discover] to search for Intec Printing
Solutions printers on the network.
The printer is added to the main window.
Automatically transferring jobs
If you cannot print as the printer is in use,
offline, or there is a paper jam, you can send the
print job to another printer automatically.
Note
z You cannot send to printer manufactured by other companies.
z Make sure to forward to the same model name.
1
Select the device.
2
Select [Confirm Connections] from the
[Remote Print] menu.
3
Click [Details].
4
Enable the [Automatic Job Redirect
Used] check box.
To forward only if a printer error such as "Offline"
or "Paper out" occurs, also enable the [Forward
only during an error] check box.
- 152 -
5
Click [Add], and set the destination IP
address.
Memo
z You can also click [Discover] to search for Intec
Printing Solutions printers on the network.
6
Repeat the operation in Step 5 as
many times as there are candidate
destinations.
Memo
z To change the destination priority ranking, select
the printer whose priority is to be changed using [IP
addresses of printers to which job is automatically
j
redirected], and then click the [ ] and [ ] buttons.
j
(Clicking the [ ] button will increase the priority,
and clicking [ ] will decrease the priority.)
7
Click [OK].
Windows utilities
Printing using multiple printers
simultaneously
You can print to multiple printers using the one-
time print instruction.
Note
z Make sure to specify the same model for the printers to
print simultaneously.
1
Select the printers.
2
Select [Confirm Connections] from the
[Remote Print] menu.
3
Click [Details].
4
Enable the [Print to more than one
printer at a time] check box, and click
[Options].
- 153 -
1
2
3
4
5