Using The Access Restriction Function (Ip Filter) With Ip Addresses; Using The Access Restriction Function With Mac Addresses - Intec CS4000 User Manual

Setting the network from the web browser
Using the access
restriction function (IP
1
filter) with IP addresses
You can manage access to the device using the IP
address.
2
Note
z The default device settings to [Disable] the [IP Filtering].
z If the IP address is entered incorrectly, access to the
device using IP protocols will be disabled. Be very careful
during setup.
3
1
Log in as an administrator.
Reference
See "Logging in as an administrator" (P.184).
z
4
2
Click [Admin Setup]>[Network
Setup]>[Security] tab.
5
3
Click [IP Filtering].
4
[Enable] the [IP Filtering] in [STEP1].
Note
z [Enable] IP filtering to disable all access from IP
address hosts outside the range set in [STEP2].
5
Set the IP address range in [STEP2].
Note
z Use the IP address to enter the range that
authorizes the printing and setup.
z For the IP address, use single-byte numbers
separated by "."
z Disabled if the IP address entered is 0.0.0.0.
z If IP address ranges overlap, the settings for the
address range with the highest [Priority] will be
prioritized.
z Regardless of the specifications in Step 2, the
administrator addresses that can be printed and set
can be set in Step 3.
6
Click the [Address Range Bar Display/
Refresh].
To correct the IP address range, reenter the
relevant IP address, and click the [Address
Range Bar Display/Refresh] again.
- 200 -
7
Set the value in [Administrator's IP
Address setting] in [STEP3].
Even if the incorrect settings were made
in [Step 2] by entering the administrator
IP address in [Administrator's IP Address
setting], the administrator can reset from
the IP address host set in [Administrator's
IP Address setting].
Note
z If accessing the device via a proxy, the address of
the proxy device will be displayed as [Your Current
Local Host/Proxy IP Address]. Consequently, the
"Your host IP address" displayed in your host
address may differ.
z If nothing is registered as the administrator IP
address, access to the device may be completely
disabled depending on the settings in Step 2.
z If you do not wish to register an administrator IP
address, leave the [Administrator's IP Address
setting] field blank.
8
Click [Submit].
9
The settings will be save in the printer,
and the network functions will restart.
Setting the network from the web browser
Using the access
restriction function with
MAC addresses
You can manage access to the device using the
MAC address.
Note
z If the MAC address is entered incorrectly, access to the
device using a network will be disabled. Be very careful
during setup.
1
Log in as an administrator.
Reference
z See "Logging in as an administrator" (P.184).
2
Click [Admin Setup]>[Network
Setup]>[Security].
3
Click [MAC Address Filtering].
- 201 -
1
2
3
4
5