Changing Ethertalk Printer Names (Macintosh); Changing Ethertalk Zones (Macintosh); Printing Without Printer Drivers (Direct Printing); Printing Pdf Files - Intec CS4000 User Manual

Setting the network from the web browser
Changing EtherTalk printer
names (Macintosh)
1
If using EtherTalk, you can add easily identifiable
names to the device.
1
Log in as an administrator.
2
Reference
See "Logging in as an administrator" (P.184).
z
2
Click [Admin Setup]>[Network
3
Setup]>[EtherTalk] tab.
4
5
3
Enter a new name in [EtherTalk Printer
Name], and click [Submit].
Note
z Settable printer names are 32 single-byte
alphanumeric characters max.
z Do not use symbols (=:*@~ ), etc., in the printer
name.
Changing EtherTalk zones
(Macintosh)
You can change the printer from the current zone
to another zone using EtherTalk delineated using
multiple logical zones.
Note
z Selectable zones are within the same segments.
1
Log in as an administrator.
Reference
See "Logging in as an administrator" (P.184).
z
2
Click [Admin Setup]>[Network
Setup]>[EtherTalk] tab.
3
Enter a new name in [EtherTalk Zone
Name], and click [Submit].
- 214 -
Printing without printer
drivers (Direct printing)

Printing PDF files

You can print PDF files even if the printer drivers
have not been installed.
Specify the file from the web browser to send to
the device.
Note
z Some PDF files may not print correctly. If printing is
incorrect, print from an application such as Acrobat
Reader.
z If printing by specifying the print page, device processing
may take some time.
1
Log in as an administrator.
Reference
See "Logging in as an administrator" (P.184).
z
2
Select the [Direct Print] tab.
3
Specify the file to be printed in [STEP1].
Click [Browse] to select the file using the
file dialog box.
4
Set up printing in [STEP2].
Setting the network from the web browser
5
Click [Print] in [STEP3].
6
Check the print setup, and click [OK].
- 215 -
1
2
3
4
5