Macintosh utilities
Network Card Setup Utility
The network can be set using the Network Card
1
Setup Utility.
2
TCP/IP must be enabled to use the Network Card
3
Setup Utility.
Note
z Set the TCP/IP.
4
Setting IP addresses
1
Start the Network Card Setup Utility.
5
Reference
See "Installing utilities"
(P.138).
z
2
Select the device.
3
Select [IP Address Setup] from the
[Setup] menu.
4
Specify the settings as necessary, and
click [Setup].
5
Enter the password, and click [OK].
– The factory-set password is the last
six alphanumeric characters of the Mac
address.
– The password is case-sensitive.
6
Click [OK] to enable the new settings.
The device network card will restart.
Making web settings
The device network can be set by starting the
web page.
Enabling web settings
1
Select [Web Setup] from the [Setup]
menu.
2
Select [Enable] and click [Setup].
3
Enter the password in [Input password],
and click [OK].
– The factory-set password is the last six
alphanumeric characters of the MAC
address.
– The password is case-sensitive.
4
Click [OK] in the verification window.
Opening web pages
1
Start the Network Card Setup Utility.
Reference
z
See "Installing utilities"
(P.138).
2
Select the device.
3
Select [Display web page] from the
[Setup] menu.
The web page will start, and the device
status page will be displayed.
- 160 -
Finishing the Network Card
Setup Utility
1
Select [Exit] from the [File] menu.
Macintosh utilities
Memo
- 161 -
1
2
3
4
5