Intec CS4000 User Manual page 88

Network setting items
„ NetBIOS over TCP
Item
1
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Short printer - -
2
name
Work group - -
name
3
Master - -
browser setup
Comments - -
4
„ E-mail receiving settings
Item
5
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Use receiving - -
protocol
POP server - -
name
POP user ID - -
POP password - -
APOP support - -
POP port - -
number
POP receiving - -
interval
Domain filter - -
E-mail from - -
the following
listed domains
Domain 1 - 5 - -
SMTP receiving - -
port number
Factory
Default Explanation
Settings
(Product Set the name identified using NetBIOS over TCP
name)-(Last 6 using 15 single-byte characters max.
digits of MAC In Windows, this is displayed in the PrintServer
address) group for the network PC.
PrintServer Sets the work group name displayed in the
Windows network PC using 15 single-byte
characters max.
Enable Specifies whether to use the master browser.
EthernetBoard Sets the comments using 48 single-byte
IntecLAN 9400g characters max.
Displayed when the Windows Explorer display is
advanced.
Factory
Default Explanation
Settings
Disable Specify whether to use the mail receiving
function. Select the protocol you want to use.
(None) Specify the POP server name. Input the domain
name and the IP address. If you input the
domain name, please set the DNS accordingly.
(None) Set the user ID to access the POP server.
(None) Set the password to access the POP server.
Disable Specify whether to use APOP.
110 Specify the port number to access the POP
server.
5 mins. Specify the interval to access the POP server for
receiving mails.
Disable Specify whether to use the domain filter
function.
Authorization Specifies whether to accept or block E-mails
from the specified domain.
(None) Specify the domain to which the domain filter
function applies.
25 Specify the port number to access this machine
via SMTP.
- 166 -
„ E-mail sending settings
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
SMTP sending - - Disable
SMTP - - None
Server name
Printer e-mail - - None
Address
SMTP - - 25
Port No.
SMTP - - Disable
authentication
User ID - - None
Password - - None
Additional - - Enable
information
Setup
Printer model
Additional - - Enable
information
Setup
Network
interface
Additional - - Enable
information
Setup
Printer serial
number
Additional - - Disable
information
Setup
Printer control
number
Additional - - Disable
information
Setup
Printer name
Additional - - Disable
information
Setup
Installation
location
Additional - - Enable
information
Setup
IP address
Additional - - Disable
information
Setup
MAC Address
Network setting items
Factory
Default Explanation
Settings
Sets whether to use the SMTP (e-mail) send
protocols.
Sets the SMTP server name. Specify the domain
name or IP address. It is necessary to set
DNS(Pri)(Sec) if specifying the domain name.
Sets the device e-mail address.
Sets the SMTP port number. In general, use the
default setting.
Sets whether to implement SMTP authentication.
Sets the SMTP authentication user ID.
Sets the SMTP authentication password.
Sets whether to include the printer model name
in the printer information described in the
outgoing mail.
Sets whether to include the network interface
name in the printer information described in the
outgoing mail.
Sets whether to include the device serial number
in the printer information described in the
outgoing mail.
Sets whether to include the device management
number in the printer information described in
the outgoing mail.
Sets whether to include the system name in the
printer information described in the outgoing
mail.
Sets whether to include the system location in
the printer information described in the outgoing
mail.
Sets whether to include the IP address in the
printer information described in the outgoing
mail.
Sets whether to include the MAC address in the
printer information described in the outgoing
mail.
- 167 -
1
2
3
4
5