[Boot Menu] - Intec CS4000 User Manual

Table of setting items in the device setup screen

[Boot Menu]

1
Note
z To enter this menu, press and hold the [OK] button while turning ON the power supply.
z To enter this menu, it is necessary to enter the [Password].
z In the default factory settings, the administrator password is [aaaaaa].
z This menu is displayed in English only.
2
Item
Network Factory Defaults
*1
HDD Setup Enable HDD
3
*1: Displayed
when the
HDD is
mounted.
Storage Check File System
4
Common
*1*2
Setup
*1: Displayed Check All Sectors
when the
5 HDD is
mounted.
*2: Displayed
when
[Enable
HDD] in
the control
panel is set
to [Yes].
Menu Lockout
Panel Lockout
z Shaded areas are factory-set values.
Details
Execute Implements network menu initialization.
No Sets whether to start the printer viewing the HDD
Yes is not mounted when the HDD is actually mounted.
Execute Implements management data (FAT information)
recovery, and resolves mismatches between the
actual (free) space in the file system and the free
space displayed.
Execute Recovers defective sector information on the HDD
and file system nonconformances.
On Sets whether not to display menus other than the
Off Secure Print/Encrypted Secure Print in the control
panel.
Mode1 Sets whether to disable the operations buttons on
Mode2 the control panel.
Off
- 272 -
„ Memo
Table of setting items in the device setup screen
- 273 -
1
2
3
4
5