Operations Environment; About Ipv6; Setting The Network From The Web Browser - Intec CS4000 User Manual

About IPv6

About IPv6
z
The device is compatible with IPv6, and the
1
IPv6 address is acquired automatically. IPv6
addresses cannot be set manually.
The device is compatible with the following
protocols.
2
z Print:
– LPR
– IPP
3
– RAW (Port9100)
– FTP
z Setup:
– HTTP
4
– SNMPv1/v3
– Telnet
5
Checking IPv6 addresses
IPv6 addresses are allocated automatically.
1
Access the device web page, and select
[Device information].
2
Select [Network]>[TCP/IP].
Memo
z If all the global addresses are displayed as "0", it is
possible an error has occurred in the router being used.
Reference
z Press the scroll buttons and , and select [Print
Information]>[Network] to check the IPv6 address using
the device network report. For reports and how to print
reports, see "Printing printer information" (P.218).
- 182 -

Setting the network from the web browser

z

Operations environment

PCs with Microsoft Internet Explorer Ver. 6.0 or
later, Safari Ver. 3.0 or later, or Firefox 3.0 or
later installed.
PCs operating using TCP/IP
Memo
z Check that the web browser security is set to medium.
The following explanation uses the following
environments as examples.
z Printer name: Intec CS5000
z Printer IP address: 192.168.0.2
z MAC Address: 00:80:87:84:9C:9B
z Web browser: Microsoft Internet Explorer
Ver.8.0
Setting the network from the web browser
Starting up
1
Start the web browser.
2
Enter the URL "http://printer IP
address/" in the address bar, and press
the Enter key.
The printer status screen will be displayed.
Note
z If including values to 1 or 2 digits in the IP address, do
not enter "0" before the value. Otherwise, communications
may be disabled.
E.g.: Correct input value: http://192.168.0.2/
Incorrect input value: http://192.168.000.002/
- 183 -
1
2
3
4
5