Using Custom Media - Intec CS4000 User Manual

Printing on various papers

Using custom media

This setting is used when you want to print on
1
heavy media.
1
Set the paper size and paper type using
the control panel.
2
(1)
Press the [Fn] key.
The number input screen appears.
3
4
(2)
Input the number depending on
the paper tray being used.
z For the multi-purpose tray
5
Press [9] and [0], and press the
[OK] button.
z For Tray1
Press [1] and [0], and press the
[OK] button.
(3)
Select the paper size, and press
the [OK] button.
(4)
Check that is displayed to the
left of the selected paper size, and
press the [BACK] button.
(5)
Select [Media Type], and press the
[OK] button.
(6)
Select [USERTYPE1] -
[USERTYPE20], and press the [OK]
button.
Check that is displayed to the
left of the selected [USERTYPE].
MPTray Config Media Type 2/2 Page
� �
Paper Size Card Stock
� �
Media Type Rough
� �
Media Weight Glossy
� �
Tray Usage Postcard
�
Envelope
�
USERTYPE1
Use Online button to return... Use Online button to return...
(7)
Press the [ON LINE] button to
return to the standby screen.
- 46 -
* In the default factory settings, paper types are set for [USERTYPE1] - [USERTYPE5] as shown in the following table.
USERTYPE Mode Name
USERTYPE1 HQ_FOR_UH1
USERTYPE2 HQ_FOR_UH2
USERTYPE3 HQ_FOR_UH3
USERTYPE4 HQ_FOR_UH4
USERTYPE5 HQ_FOR_UH5
Printing on various papers
Media Type Media Weight
Plain Ultra Heavy1
Plain Ultra Heavy2
Plain Ultra Heavy3
Plain Ultra Heavy4
Plain Ultra Heavy5
- 47 -
1
2
3
4
5