Using Snmpv3 - Intec CS4000 User Manual

Setting the network from the web browser
8
Check the set details of the malfunction
notifications conditions.
z Displaying tables
1
(1)
Click the [Show current settings
table] button.
(2)
Check the set details, and close the window.
2
3
4
z Comparing the set conditions for 2 addresses
(1)
Use the list box to select each
address to be compared.
5 (2)
Check the settings details that are
displayed.
Memo
z You can change the notification condition settings
by clicking the set conditions comparison details.
9
Click [Submit].
10
The settings will be save in the printer,
and the network functions will restart.

Using SNMPv3

The device is equipped with a SNMPv3-
compatible agent.
You can safely encrypt the device management
using SNMP if using the SNMPv3-compatible SNMP
manager.
1
Log in as an administrator.
Reference
See "Logging in as an administrator" (P.184).
z
2
Click [Admin Setup]>[Network Setup]
tab.
3
Click [SNMP]>[Settings].
- 208 -
4
Enable the SNMP version to be used
check box in [STEP1], and click [To
STEP2].
Memo
z If [SNMPv3] is selected, referencing and setups
using SNMPv1 will be disabled. If [SNMPv3+v1] is
selected, both SNMPv1 and SNMPv3 can be used for
referencing, but only NMPv3 can be set.
5
Enter the SNMPv3 user name in [User
Name] in [STEP2].
6
Enter the authentication password in
[Passphrase] in [Authentication Settings].
Setting the network from the web browser
7
Select [Algorithm].
8
Enter the encryption pass phrase in
[Passphrase] in [Privacy (Encription) Settings].
Memo
z Only [DES] can be selected as the encryption algorithm.
9
Click [Submit].
10
The settings will be save in the printer,
and the network functions will restart.
Memo
z Set the context name for the SNMP manager to be used in
"v3context".
- 209 -
1
2
3
4
5