Intec CS4000 User Manual page 90

Network setting items
Item
Network
Configuration
Card Setup
1
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Security - -
2
Advanced - -
Advanced - -
3
„ SNMP
Item
Network
Configuration
Card Setup
4
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Setting SNMP - -
to be used
User name - -
5
Secure Print - -
Setting
Pass phrase
Secure Print - -
Setting
Algorithm
Encrypted - -
settings
Pass phrase
Encrypted - -
settings
Algorithm
New SNMP - -
read
community
New SNMP - -
write
community
„ SNMP Trap
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Printer trap - -
community
setup
Address 1 to 5 - -
Factory
Default Explanation
Settings
Disable Sets whether to notify you of warnings occurring in
the security functions.
Enabled only if periodic notifications are selected.
2H 0M Sets whether to notify you of other major errors.
Enabled only if notify upon occurrence is selected.
Enable Sets whether to notify you of other major errors.
Enabled only if periodic notifications are selected.
Factory
Default Explanation
Settings
SNMPv3+v1 Specifies the SNMP version.
root Set the SNMPv3 user name using 32 single-byte
characters max.
(None) Sets the password to create an authentication
key for SNMPv3 packet authentication. Set using
8 to 32 single-byte characters.
MD5 Specifies the algorithm for SNMPv3 packet
authentication.
(None) Sets the password to create a privacy key for
SNMPv3 packet encryption. Set using 8 to 32
single-byte characters.
DES Specifies the algorithm for SNMPv3 packet
encryption. This value cannot be changed.
public Sets the SNMPv1 read community using 15
single-byte characters max.
public Sets the SNMPv1 write community using 15
single-byte characters max.
Factory
Default Explanation
Settings
public Sets the printer trap community using 31 single-
byte characters max.
0.0.0.0 Specifies the trap notification destination. You
can specify up to 5 addresses max.
- 170 -
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
Trap send - - Disable
authorizations
1 to 5
Printer restart - - Disable
1 to 5
Illegal trap - - Disable
receipt 1 to 5
Online 1 to 5 - - Disable
Offline 1 to 5 - - Disable
No paper 1 to - - Disable
5
Paper jam - - Disable
1 to 5
Cover open 1 - - Disable
to 5
Printer error 1 - - Disable
to 5
„ IPP
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
IPP - - Disable
Notices - - (None)
from the
administrator
Character code - - UTF-8
Language - - EN-US
AUTHENTICATION - - NONE
User name 1 - - (None)
to 50
Password 1 to - - (None)
50
Network setting items
Factory
Default Explanation
Settings
Specifies whether to use printer trap in TCP
numbers 1 to 5.
Specifies whether to send SNMP messages when
the printer is restarted.
Specifies whether to use the trap when the
device is accessed using a utility name not set
using [Printer trap community name setup].
Specifies whether to send SNMP messages
whenever the device is online.
Specifies whether to send SNMP messages
whenever the device is offline.
Specifies whether to send SNMP messages when
the device is out of paper.
Specifies whether to send SNMP messages when
a paper jam occurs.
Specifies whether to send SNMP messages when
the device cover is open.
Specifies whether to send SNMP messages when
an error occurs.
Factory
Default Explanation
Settings
Specifies whether to use IPP.
Enter a message according to the language
selected using [Character code] and [Language].
Specifies the character set used when sending
the settings to the device.
Specifies the language used in the setup, including
the text strings.
Specifies whether to use authentication when
implementing IPP printing.
Specifies the user name using 63 single-byte
characters max. If [BASIC] has been selected in
[Secure print].
Specifies the password using 16 single-byte
characters max. If [BASIC] has been selected in
[Secure print].
- 171 -
1
2
3
4
5