2.3
Setting the E10A-USB Emulator
2.3.1
Setting the DIP Switches of the E10A-USB Emulator
Set the DIP switches of the E10A-USB emulator as follows.
1. Open the sliding switch cover in the lower right portion of the upper side of the E10A-USB
emulator by sliding it to the right as shown in figure 2.12.
2. Turn all of the DIP switches (SW1, SW2, and SW3) on ('1' side).
Figure 2.12 Setting the DIP Switches of the E10A-USB Emulator
30
ACT
R
ENESAS
ON
OFF