Changing Settings; Initial Setting Of The Emulator - Renesas M34286T2-CPE User Manual

M34286T2-CPE User's Manual

2.3 Changing Settings

2.3.1 Initial setting of the emulator

Set the switches on the emulator according to the condition.
Figure 2.2 Switch positions of the emulator
Note on Switch Settings:
• Always shut OFF the emulator before changing switch settings and connecting the cable, etc. Otherwise
the internal circuit may cause a break.
R20UT0214EJ0200 Rev.2.00
Sep 16, 2010
CAUTION
2. Setup
Page 22 of 70