Setting The Power-Selection Switch - Renesas HS7125EDB01H User Manual

2.2.3

Setting the Power-Selection Switch

The external power supply or the VCC power supply on the user system can be selected as the
source of power for the debugging MCU board. Refer to table 2.1 when selecting the power
supply to be used.
Table 2.1 Correspondence of Power-Selection Switch Settings
Silk-Screened Label
EXTERNAL
USER SYSTEM
24
Figure 2.6 Power-Selection Switch
Power Supply to be Used
External power supply connected to the power cable (factory setting)
VCC on the user system