Observe the precautions listed below. Failure to do so
will result in a FIRE HAZARD and will damage the user
system and the emulator product or will result in
PERSONAL INJURY. The USER PROGRAM will be
LOST.
1. Do not repair or remodel the emulator product by
yourself for electric shock prevention and quality
assurance.
2. Always switch OFF the emulator and user system
before connecting or disconnecting any CABLES or
PARTS.
3. Always before connecting any CABLES, make sure that
pin 1 on both sides are correctly aligned.
4. If cables are connected incorrectly in the case of the
SH7125, the power-supply pins will be shorted as shown
below:
4 (Vcc)
22 (Vcc)
24 (Vss)
VI
WARNING
90˚ rotation
52 (AVss)
6 (Vss)
8 (V
)
CL
270˚ rotation
6 (Vss)
22 (Vcc)
8 (V
)
24 (Vss)
CL
52 (AVss)
4 (Vcc)