Top of the Main Unit of the Debugging MCU Board (3)
Figure 1.5 Top of the Main Unit of the Debugging MCU Board (3)
(a) Power-cable connector:
(b) H-UDI interface
connector (36 pins):
(c) H-UDI interface
connector (14 pins):
(d) User system interface
connector 1:
12
(a)
(d)
This connector is used to connect the debugging MCU board to the
power cable for the external power supply.
This connector is used to connect the debugging MCU board to the
36-pin cable of the E10A-USB emulator.
This connector is used to connect the debugging MCU board to the
14-pin cable of the E10A-USB emulator.
This connector is used to connect the main unit of the debugging
MCU board to the FFC cable.
Note: The FFC cable already occupies this connector in the product as
shipped. Do not remove the cable from the connector.
(c)
(b)