2.3.2
CD-R
The emulator's software for the debugging MCU board is included in the CD-R provided with the
E10A-USB emulator.
The root directory of the CD-R contains a setup program for installing the emulator's software for
the debugging MCU board. The folders contain the files and programs listed below.
Table 2.4 Contents of the CD-R Directories
Directory Name
Dlls
Drivers
Help
Manual
Execute Setup.exe from the root directory of the CD-R to start the installation wizard.
Follow the cues given by the installation wizard to install the software.
Note: When a driver is installed in Windows
test may be displayed, but it is not a problem. Select [Continue Anyway] to proceed with
driver installation.
Contents
®
Microsoft
runtime library
E10A-USB emulator driver
Online help for the E10A-USB
emulator
E10A-USB emulator manuals
Description
A runtime library for the High-performance
Embedded Workshop. The version is checked
at installation and this library is copied to the
hard disk as part of the installation process.
USB drivers for the E10A-USB emulator.
An online help file. This is copied to the hard
disk as part of the installation process.
E10A-USB emulator user's manuals. They
are provided as PDF files.
®
XP, a warning message on the Windows
®
logo
31