Table of Contents
Advertisement
READ the following warnings before using the debugging
MCU board. Incorrect operation will damage the user system
and the debugging MCU board. The USER PROGRAM will be
LOST.
1. Check all components against the component list after unpacking the emulator.
2. Never place heavy objects on the casing.
3. Protect the emulator from excessive impacts and stresses. For details, refer to section 1.5,
Environmental Conditions.
4. Only supply the power of the specified voltages or power-supply frequencies to the debugging
MCU board.
5. When moving the host computer or user system, take care not to vibrate or damage it.
6 After connecting the cable, check that it is connected correctly. For details, refer to section 2,
Setting Up the Debugging MCU Board.
7. Supply power to the connected equipment after connecting all cables. Cables must not be
connected or removed while the power is on.
1.2
Components
After removing the product from its packaging, confirm that you have all of the components. For
details on the components of the debugging MCU board, refer to section 1.3, Components in the
Package for the Debugging MCU Board. If any component is not present, contact your nearest
Renesas sales office.
4
CAUTION
Advertisement
Table of Contents
