Starting Up Emulator Debugger M3T-Pd308M; Setting The Operating Environment Of Emulator Debugger M3T-Pd308M - Renesas M30800T-CPE User Manual

2.7 Starting Up Emulator Debugger M3T-PD308M

After checking the emulator has started up normally, start up emulator debugger M3T-PD308M.
For starting up emulator debugger M3T-PD308M, follow the steps below.
Click the start button of Windows.
And select Program (P) -> [RENESAS-TOOL] -> [PD308M V.1.10 Release 1*] -> [PD308M].
* Varies depending on the version of the emulator debugger.

2.8 Setting the Operating Environment of Emulator Debugger M3T-PD308M

After starting up M3T-PD308M, as the Init dialog box will open, set up as shown in Figure 2.13. For
details on Init dialog box, refer to user's manual of M3T-PD308M.
(2) Select the serial port
(3) After completed the
Figure 2.13 Setting Init dialog box
where the emulator
is connected.
settings, click OK
button.
( 27 / 52 )
(1) Click Refer button and
select the MCU file
"M30800.MCU".
The MCU file is stored
in the MCUFILES
directory under the
directory where M3T-
PD308M is installed.