Starting Up The Emulator Debugger (Mcu Setting Dialog Box) - Renesas R0E436640CPE00 User Manual

R0E436640CPE00 User's Manual

3.3 Starting Up the Emulator Debugger (MCU Setting Dialog Box)

(1) MCU tab
1) Specifying the processor mode
2) Referencing the MCU pin status
REJ10J0918-0300 Rev.3.00 February 15, 2007
Cancel
Help
Cancel Help
3. Usage (Emulator Debugger)
Specifying the processor mode
Select the appropriate processor mode that suits your
system. For the H8/300H Series, you can specify only the
following processor mode.
- Single-chip Mode
Referencing the MCU pin status
This column shows the state of each MCU pin.
"NC" means that the value is indeterminate.
Page 44 of 102