Telemetry :Rpm - FUTABA 7PX User Manual

Speed information from an SBS-01RM (telemetry rotation sensor) sold separately is dis-
played and set at this screen. The speed of the engine, motor, etc. of the chassis while run-
ning can be viewed at the transmitter. When the speed becomes higher (lower) than the set
speed, it can be announced by an alarm and vibration.
* A RPM sensor must be installed in the model car. Install and connect the sensor in accordance with the
sensor instruction manual.
Telemetry
Sets the limit speed
Upper limit/ lower limit
(Speed that sound an alarm)
Alarm and Vibrator function setup
1
(Gear ratio adjustment)
Tap the [Gear ratio]. Value input buttons appear on the
screen.
Use the [+] or [-] button to adjust the Gear ratio.
2
(Limit adjustment)
Tap the " Limit] or "
" [
Use the [+] or [-] button to adjust the limit voltage.
3
(Alarm and vibrator function setup)
Tap the " "
" /
"Inhibit":No audible alarm/ "Buzzer":Audible alarm/ "Voice":Voice alarm
Tap the " " / "
"Inhibit" :No active vibration
"Type1" :Continuous vibration
"Type2" :Intermittent vibration for a long time
"Tyoe3" :Intermittent vibration for a short time
4
(Speech function setup)
Tap the "Voice" (ON) or (OFF) to select ON / OFF.
"OFF" :No voice guide
"ON" :Information loaded by voice
5
When fi nished, return to the Telemetry screen by pressing the HOME button.
156
1M23N32602_7PX_E.indb 156

Telemetry :RPM

Limit]. Value input buttons appear on the screen.
" [
[Alarm] type and select [Inhibit], [Buzzer]or [Voice].
"
" [Vibrator] type and select [Inhibit], [Type 1], [Type 2], or [Type 3].
Current RPM
The maximum when powering
ON are shown.
Alarm and vibrator ON/OFF and
type setting (The
that an alarm is generated when the
speed drops below the set value and
the arrow indicates that an alarm is
generated when the speed exceeds
the set value.)
Gear ratio
The Speech function (ON/OFF)
Telemetry
arrow indicates
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
*The voice guide loading inter-
val is set by sensor menu.
2017/08/02 14:17:41