Table of Contents
Advertisement
This procedure changes the slot number of one registered sensor. Connect the sensor as
shown in the figure (page 166), and change slot number.
This function is set when using multiple telemetry sensors of the same type.
Sensor slot change
1
(Change)
Tap the [Change slot]. The sensor details screen is displayed. Tap the [Read]. The confirma-
tion screen will be displayed. To execute, tap [Yes] to hear an electronic sound and finish
reading. To cancel, select [No] and touch it. If "Reading succeeded" appears and the current
sensor information is displayed.
2
(Number setting)
Tap the value button of the [Start slot #].
Value input buttons appear on the screen.
Use the [+] and [-] buttons to set the start
slot number.
3
Tap the [Write]. When "Writing succeeded"
message is displayed, the number change
is completed.
4
When finished, return to the Sensor screen by pressing the HOME button.
1M23N32602_7PX_E.indb
167
Change Slot
Sensor
Setting button
Setting with the [+] and [-] but-
tons.
2017/08/02
167
14:17:44
Advertisement
Table of Contents
