Telemetry :Receiver Battery - FUTABA 7PX User Manual

This function displays and sets the receiver power supply battery. The sensor sold separately
does not have to be installed. The transmitter initial state voltage is also displayed. For a
description of alarm setting when the voltage drops, see the description of the procedure on
this page.
Telemetry
Sets the limiter voltage
(Voltage that sounds an alarm)
Alarm and Vibrator function setup
1
(Limit adjustment)
Tap the [Limit]. Value input buttons appear on the screen.
Use the [+] or [-] button to adjust the limit voltage.
2
(Alarm function setup)
Tap the [Alarm] type and select [Inhibit], [Buzzer]or [Voice].
"Inhibit" :No audible alarm
"Buzzer" :Audible alarm
"Voice" :Voice alarm
3
(Vibrator function setup)
Tap the [Vibrator] type and select [Inhibit], [Type 1], [Type 2],
or [Type 3].
"Inhibit" :No active vibration
"Type1" :Continuous vibration
"Type2" :Intermittent vibration for a long time
"Tyoe3" :Intermittent vibration for a short time
4
(Speech function setup)
Tap the "Voice" (ON) or (OFF) to select ON / OFF.
"OFF" :No voice guide
"ON" :Information loaded by voice
5
When fi nished, return to the Telemetry screen by pressing the HOME button.
154
1M23N32602_7PX_E.indb 154
Telemetry :Receiver Battery Voltage
Current receiver battery voltage
The minimum and maximum when
powering ON are shown.
Alarm/vibrator ON/OFF and type
setting (The arrow indicates that an
alarm is generated when the power
supply voltage drops below the set
value.)
The Speech function (ON/OFF)
Telemetry
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
Setting
- Tap alarm type.
Inhibit/ Buzzer/ Voice
Setting
- Tap Vibrator type.
TInhibit/ Type 1/ Type 2/ Type 3
Setting
- Tap (ON) / (OFF).
*The voice guide loading inter-
val is set by sensor menu.
2017/08/02 14:17:40