FUTABA 7PX User Manual page 145

Reverse cancel
MC401,402CR/MC950CR/MC940,960CR :ACT/INH
Same as Link software Reverse Cancel.
When set to "ACT", reverse operation is not performed.
Robot mode
MC401,402CR/MC950CR/
MC940,960CR :ACT/INH
Same as Link software Robot
Model.
When set to "ACT", brake op-
eration is not performed, there
is only forward and reverse
operation.
Brake slope
MC940,960CR/ :0~300
Same as Link software Brake Slope.
This function adjusts the braking effect when the throttle was returned (throttle off). It can-
cels operation like that called engine brake of actual vehicles.
Brake timer
MC940,960CR/MC950CR :0sec~300sec
Same as Link software Brake Timer.
When the reverse function is used, ordinarily if the trigger is not
moved to the brake (reverse) side and then returned from the brake
operation position to the neutral position, reverse operation will not be
performed. However, when used by intentionally moving the neutral
point to the forward side, if brake operation is repeated, reverse opera-
tion may be performed even if the trigger is not returned to the neutral position. The time re-
quired to switch to reverse operation can be set to prevent this from occurring.was returned
(throttle off). It cancels operation like that called engine brake of actual vehicles.
Lead angle
MC950CR/ :0~1500
Same as Link software Lead Angle.
The lead angle of the motor can be set at the MC950CR side. How-
ever, we recommend that it normally be set to "0". Since this setting is
premised on setting by referring to the speed log by the Link software.
146
1M23N32602_7PX_E.indb 146
MC401,402CR MC940,960CR
MC Link (ESC Link)
MC945CR
MC940,960CR
MC945CR
2017/08/02 14:17:38