Table of Contents
Advertisement
Switch setting
Use PS1 to 6 to switch the A.B.S. function ON/OFF.
See the switch select function. (page 69)
Dial / Trim Setting
The brake return amount, delay amount and cycle speed can be controlled with digital
trim DT1~DT6 or digital dial DL1 etc. with the dial select function. (page 66)
Example of A.B.S. function setting when S9373SV used
(There will be a slight difference depending on the state of the linkage.)
Brake return: Approx. 30% (If this value is too high, the braking distance will increase.)
Cycle speed: 5~7
Duty ratio: 0 (When grip is low: - side, when grip is high: + side)
Delay : 10~15%
Trigger point: Approx. 70%
Steering mixing: Off
- When the wheels lock, or the car spins, when the brakes are applied fully
Brake return: Increase from 30%
Duty ratio: Shift from 0 to - side (-1, -2, -3, -4)
Delay : Reduce the delay
- When the braking effect is poor and the braking distance is long when the brakes are
applied fully
Brake return: Decrease from 30%
Duty ratio: Shift from 0 to + side (+1, +2, +3, +4)
DLY: Increase the delay
94
1M23N32602_7PX_E.indb
94
A.B.S
2017/08/02
14:17:27
Advertisement
Table of Contents
