Table of Contents
Advertisement
Value Of Each Function And Changing The Set Value
On the setting screen of each function, if you tap the item to be set, [-] [reset] [+] will be
displayed at the bottom of the screen, tap the [-] [+] on the panel Set. Tap[Reset] to return to
the initial value. There are items with no [reset].
The setting of ON / OFF changes when you tap (ON) or (OFF).
To select from multiple items, tap [Item] and tap from the screen of the displayed list to se-
lect it.
46
1M23N32602_7PX_E.indb
46
Example: To change the right-hand side steering amount
on the end point screen, tap the right of the steering
wheel, and when [-] [reset] [+] is displayed at the bottom
of the screen, press + To decrease, tap [-] to change the
numerical value. If you leave it tapped, the value changes
continuously. Tap [Reset] to return to the initial value.
When resetting is executed,
a confi rmation screen is dis-
played. To reset, tap [Yes],
otherwise tap [No].
Example: When turning off the auto power off function on
the battery setting screen, tap (ON) of auto power off to
display (OFF) and the function will be invalid.
Example: Tap the display language [Eng-
lish] on the system information setting
screen, the list screen of available lan-
guages will be displayed. To change to Ger-
man, touch [German], the screen display
becomes German. If you do not want to
change, tap [Cancel] to close the screen.
* Depending on the function, items may be
switched in order by tapping.
2017/08/02
14:17:14
Advertisement
Table of Contents
