Roll Out Chart - FUTABA 7PX User Manual

This function is designed for pan cars. The roll out chart can be calculated from input val-
ues for the number of teeth of the spur gear and pinion gear, and the tire diameter, and dis-
played as a table.
Home screen
Use of Roll out chart function
1
(Setting of step of the tire diameter input)
Tap the value button of the [Step]. Value
input buttons appear on the screen. Use
the [+] and [-] buttons to set the step of input
numerical value of tire diameter amount.
- The step amount can be set in the range of 0.1 mm
to 1.0 mm.
2
(Setting of number of teeth of spur gear)
Tap the value button of the [Super]. Value input buttons appear on the screen. Use the [+] and [-]
buttons to set the spur gear. The roll out is then calculated, and the list is updated.
3
(Setting of number of teeth of pinion gear)
Tap the value button of the [Pinion]. Value input buttons appear on the screen. Use the [+]
and [-] buttons to set the pinon gear. The roll out is then calculated, and the list is updated.
3
(Setting of tire diameter)
Tap the value button of the [Diameter]. Value input buttons appear on the screen. Use the [+]
and [-] buttons to set the tire diameter. The roll out is then calculated, and the list is updated.
4
When fi nished, return to the Accessory menu screen by pressing the HOME button.
1M23N32602_7PX_E.indb 149

Roll Out Chart

Menu screen Accessory menu screen
Roll Out Chart
Roll out chart
Setup item
Pinion
Sper
Step
Diameter
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
2017/08/02
149
14:17:39