Tilt Mixing - FUTABA 7PX User Manual

Tilt mixing uses an outboard engine and applies bidirectional mixing from rudder to steady
to flap and from flap to rudder so that with a boat, rudder operation and tilt mixing opera-
tion can be performed 2 servos.
Tilt mixing can be performed by rudder operation, by steering wheel and flap channel.
Effect of the set value of other functions on tilt mixing
Steering end point function, curve function, speed function, or D/R function setup also
effects flap channel operation. However, even if set, steering reverse function setup does
not reverse the flap channel.
Home screen
The mixing function is assigned to auxiliary channels used by other mixing cannot be
used. When the number of channels is insufficient, cancel the other mixing.
Program composite adjustment
(Preparation)
- Use the "Trim/dial select" function to select the flap channel
operation dial. (page 662)
1
(Function ON/OFF)
Tap [1/2] at the upper right of the screen to
display page 2.
Tap "Mixing" (ON) or (OFF) to select ON /
OFF.
"OFF" :Mixing function OFF
"ON" :Mixing function ON
1M23N32602_7PX_E.indb 125

Tilt Mixing

Menu screen
Menu-1
Tilt Mixing
mixing
Menu-2
Setting
- Tap (ON) / (OFF).
125
2017/08/02 14:17:33