The Gear Retio Chart can be calculated from input values for the number of teeth of the
spur gear and pinion gear, and secondary gear ratio, and displayed as a table.
Home screen
Use of Roll out chart function
1
(Setting of number of teeth of spur gear)
Tap the value button of the [Super]. Val-
ue input buttons appear on the screen.
Use the [+] and [-] buttons to set the spur
gear. The roll out is then calculated, and the
list is updated.
2
(Setting of number of teeth of pinion gear)
Tap the value button of the [Pinion]. Value input buttons appear on the screen. Use the [+]
and [-] buttons to set the pinon gear. The roll out is then calculated, and the list is updated.
2
(Setting of number of secondary gear ratio)
Tap the value button of the [2nd gear ratio]. Value input buttons appear on the screen. Use
the [+] and [-] buttons to set the 2nd gear ratio. The roll out is then calculated, and the list is
updated.
3
When fi nished, return to the Accessory menu screen by pressing the HOME button.
150
1M23N32602_7PX_E.indb
150
Gear Retio Chart
Menu screen
Accessory menu screen
Gear Retio Chart
Gear ratio chart
Setup item
Pinion
2nd Gear ratio
Sper
Adjustment buttons
- Adjust with the [+] and [-] but-
tons.
- Return to the initial value by
tapping the [reset] buttons.
2017/08/02
14:17:39