FUTABA 7PX User Manual page 171

3
(Copy destination model selection)
Tap the "Copy to" [model name], select the
model list so it will tap. The source model
is selected and the model list is closed.
-The model currently in use cannot be selected.
-Since the copy destination cannot be overwritten
when it is in a microSD card, a models list is not dis-
played and the model is saved directly to the microSD
card.
4
(Copy execution)
Tap the [Copy], The confirmation message
"Are you sure" appears. To execute copy,
tap [Yes] and to cancel copy, select [No].
When the copy destination model name
becomes the same name as the copy
source, copying is complete.
5
When finished, return to the Model menu screen by pressing the HOME button.
microSD card storage destination
When a microSD card is installed in the T7PX, a folder called "Futaba" is created, and folders
called "LOG" and "MODEL" are created in it. The "MODEL" folder contains the model data.
172
1M23N32602_7PX_E.indb 172
When the T7PX model data is copied, and the copy source data is select-
ed from the model data stored in the microSD, a model list like that shown
at the left is displayed.
Model copy
Copy destination
Tap to select from the list
Copy execution
Tap the [Copy]
Model data
2017/08/02 14:17:46