EAS3D81039
INSTALLING THE CYLINDER COVERS
1. Install:
• Rear cylinder right cover "1"
• Rear cylinder left cover "2"
• Front cylinder right cover "3"
• Front cylinder left cover "4"
Cylinder cover bolt
8 Nm (0.8 m·kg, 5.8 ft·lb)
TIP
Tighten the cover bolts temporarily, and then
tighten the intake-side bolts, then the exhaust-
side bolts, to specification.
1
3
4
EAS3D81018
INSTALLING THE SHIFT ARM
1. Install:
• Shift arm "1"
Shift arm bolt (for
XVS13AA(C)/XVS13CTA(C))
10 Nm (1.0 m·kg, 7.2 ft·lb)
Shift arm bolt (for XVS13CA(C))
16 Nm (1.6 m·kg, 11 ft·lb)
TIP
Align the "I" mark "a" in the shift shaft with the
punch mark "b" in the shift arm.
2. Adjust:
• Shift rod length
Refer to "ADJUSTING THE SHIFT PEDAL"
on page 3-24.
2
a
b
1
5-8
ENGINE REMOVAL