Yamaha Star XVS13AA(C) 2011 Service Manual page 442

The tail/brake light fails to come on. (For XVS13CA(C))
1. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-93.
OK ↓
2. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-93.
OK ↓
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM (for
XVS13CA(C))" on page 8-31.
OK ↓
Replace the tail/brake light.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal light bulbs
and sockets.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-98.
OK ↓
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-93.
OK ↓
3. Check the turn signal relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-103.
OK ↓
4. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM (for
XVS13AA(C)/XVS13CTA(C))" on
page 8-29 and "CIRCUIT DIA-
GRAM (for XVS13CA(C))" on page
8-31.
OK ↓
Replace the meter assembly.
SIGNALING SYSTEM
NG →
Replace the front brake light switch.
NG →
Replace the rear brake light switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the turn signal light bulb(s), sock-
et(s) or both.
NG →
The turn signal switch is faulty. Replace
the left handlebar switch.
NG →
Replace the turn signal relay.
NG →
Properly connect or repair the signaling
system's wiring.
8-35