Yamaha Star XVS13AA(C) 2011 Service Manual page 193

TIP
Install the tire and wheel with the marks "1"
pointing in the direction of wheel rotation.
5. Tighten: (for XVS13AA(C)/XVS13CTA(C))
• Front wheel axle
• Front wheel axle pinch bolt
Front wheel axle
59 Nm (5.9 m·kg, 43 ft·lb)
Front wheel axle pinch bolt
20 Nm (2.0 m·kg, 14 ft·lb)
ECA3D81011
NOTICE
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
6. Tighten: (for XVS13CA(C))
• Front wheel axle
• Front wheel axle pinch bolts
Front wheel axle
72 Nm (7.2 m·kg, 52 ft·lb)
Front wheel axle pinch bolt
20 Nm (2.0 m·kg, 14 ft·lb)
ECA3D81011
NOTICE
Before tightening the wheel axle, push down
hard on the handlebar several times and
check if the front fork rebounds smoothly.
M MMM M MMM M M MMM M M MMM M
a. Insert the front wheel axle from the right side
and tighten it to 72 Nm (7.2 m·kg, 52 ft·lb).
b. Check that the right end of the front wheel
axle is flush with the front fork. If necessary,
manually push the front wheel axle or lightly
tap it with a soft hammer until its end is flush
with the front fork. However, if the surface of
the front wheel axle end is not parallel to the
surface of the front fork, align a point on the
M MMM M M MMM M MMM
4-18
outer edge of the axle with the fork, making
sure that the axle does not protrude past the
fork.
c. In the order pinch bolt "1" → pinch bolt "2" →
pinch bolt "1", tighten each bolt to 20 Nm (2.0
m·kg, 14 ft·lb) without performing temporary
tightening.
2 1
L LLL L LLL L L LLL L L LLL L
7. Install:
• Front brake caliper(s)
Front brake caliper bolt
40 Nm (4.0 m·kg, 29 ft·lb)
EWA3D81008
WARNING
Make sure the brake hoses are routed prop-
erly.
FRONT WHEEL
L LLL L L LLL L LLL