Table of Contents
Advertisement
CABLE ROUTING (for XVS13AA(C)/XVS13CTA(C))
1. Horn
2. Rear brake light switch
3. Rear brake master cylinder
4. Brake fluid reservoir hose
5. Coolant reservoir breather hose
6. Rear brake hose
7. Brake fluid reservoir
8. Coolant reservoir hose
9. Horn lead
10. Rear brake light switch lead
A. Install the brake fluid reservoir hose with its paint
mark facing upward.
B. Fasten the rear brake hose, brake fluid reservoir
hose, horn lead, and rear brake light switch lead
with the plastic bands. Make sure to align the white
paint marks on the brake fluid reservoir hose with
the plastic bands.
C. Route the brake fluid reservoir hose through the
guide.
D. Fasten the brake fluid reservoir hose with the
holder.
E. Point the ends of the hose clamp inward.
F. Fasten the rear brake hose with the holder.
G. Point the end of the hose clamp upward.
°
H. 20
I.
Align the ends of the hose clamp on the coolant
reservoir cap with the coolant reservoir hose.
J. Point the ends of the hose clamp upward.
K. Connect the curved end of the coolant reservoir
hose to the coolant reservoir.
L. Point the ends of the hose clamp outward.
M. Point the ends of the hose clamp downward.
N. Insert the projection on the plastic band completely
into the hole in the coolant reservoir cover bracket.
2-64
Advertisement
Chapters
Table of Contents
