Table of Contents
Advertisement
CABLE ROUTING (for XVS13AA(C)/XVS13CTA(C))
1. Front cylinder exhaust pipe
2. Rear brake light switch coupler
3. Rear brake hose
4. Brake fluid reservoir hose
5. O
sensor
2
6. O
sensor coupler
2
7. Lean angle sensor
8. Coolant reservoir hose
9. Fuel hose
10. Clutch cable
11. Wire harness
A. Be sure not to pinch the O
installing the coolant reservoir cap cover.
B. Fasten the wire harness with the holders.
C. Fasten the horn lead, rear brake light switch lead,
rear brake hose, and brake fluid reservoir hose
with the plastic band. Align the plastic band with
the exhaust pipe protector screw clamp and point
the end of the band downward.
D. Position the rear brake light switch coupler to the
inside of the rear brake hose and brake fluid
reservoir hose.
E. To horn and rear brake light switch
F. To O
sensor
2
G. To fuel pump
H. To coolant reservoir
I.
To clutch cover
J. Route the clutch cable through the guides.
K. Fasten the O
sensor lead to the coolant reservoir
2
cover with the plastic band.
L. Insert the projection on the O
the hole in the coolant reservoir cover.
M. To wire harness
N. Position the end of the plastic band to the inside of
the coolant reservoir cover.
sensor lead when
2
sensor coupler into
2
2-62
Advertisement
Chapters
Table of Contents
