Yamaha Star XVS13AA(C) 2011 Service Manual page 111

1. Air temperature sensor lead
2. Air temperature sensor
3. Front right turn signal/position light lead
4. Front brake hose
5. Wire harness
6. Main switch lead
7. Front left turn signal/position light lead
8. Throttle cable (decelerator cable)
9. Throttle cable (accelerator cable)
10. Right handlebar switch lead
11. Meter assembly lead
12. Left handlebar switch lead
13. Clutch cable
14. Front turn signal couplers
15. Headlight coupler
16. Main switch couplers
17. Front turn signal/position light lead
A. Route the air temperature sensor lead between the
front brake hose and the headlight bracket.
B. Route the front right turn signal/position light lead
to the front of the front brake hose.
C. Route the front left turn signal/position light lead to
the front of the front brake hose.
D. Fasten the main switch leads with the holder.
E. Route the main switch leads through the left side
of the hole in the headlight body.
F. Route the front turn signal/position light leads
through the lower left portion of the hole in the
headlight body.
G. Route the air temperature sensor lead to the rear
of the headlight bracket.
H. Fasten the front turn signal/position light leads with
the holder.
I. Secure the plastic locking tie by inserting the
projection on the tie into the hole in the headlight
bracket.
J. Secure the holder by inserting the projection on
the holder into the hole in the headlight bracket.
CABLE ROUTING (for XVS13CA(C))
2-84