Installing The Swingarm - Yamaha Star XVS13AA(C) 2011 Service Manual

5. Check:
• Bearings
Damage/pitting → Replace.
EAS28780

INSTALLING THE SWINGARM

1. Lubricate:
• Bearings
• Spacers
• Dust covers
• Pivot shaft
Recommended lubricant
Lithium-soap-based grease
2. Install:
• Bearings "1"
Installed depth "a"
0–1.0 mm (0–0.04 in)
C
1 2
A
a
D
1
A
a
2. Swingarm
A. Left side
B. Right side
C. For XVS13AA(C)/XVS13CTA(C)
D. For XVS13CA(C)
3. Install:
• Pivot shaft nut
Pivot shaft nut
85 Nm (8.5 m·kg, 61 ft·lb)
4. Install:
• Rectifier/regulator
1
B
a
1
2
B
a
4-98
TIP
When installing the rectifier/regulator, first tight-
en the upper bolt, then the lower bolt.
Rectifier/regulator bolt
7 Nm (0.7 m·kg, 5.1 ft·lb)
5. Adjust:
• Drive belt slack
Refer to "ADJUSTING THE DRIVE BELT
SLACK (for XVS13AA(C)/XVS13CTA(C))"
on page 3-24 and "ADJUSTING THE DRIVE
BELT SLACK (for XVS13CA(C))" on page
3-26.
SWINGARM