Installing The Cylinder Head Covers; Installing The Camshaft Sprocket Cover And Engine Left Side Cover - Yamaha XV1700P Service Manual

ROCKER ARMS, PUSH RODS AND VALVE LIFTERS
c. Install the rocker arm base bolts.
NOTE:
Tighten the rocker arm base bolts in stages
and in a crisscross pattern.
Rocker arm base bolt 1
10 Nm (1.0 m • kg, 7.2 ft • lb)
Rocker arm base bolt 2
24 Nm (2.4 m • kg, 17 ft • lb)
L LLL L LLL L L LLL L
INSTALLING THE CYLINDER HEAD
COVERS
The following procedure applies to both cylin-
ders.
1. Install:
• dowel pins 1
• cylinder head cover gasket 2
2. Install:
• cylinder head cover 1
Bolts 2: = 40 mm (1.57 in)
Bolts 3: = 50 mm (1.97 in)
Bolts 4: = 60 mm (2.36 in)
INSTALLING THE CAMSHAFT SPROCKET
COVER AND ENGINE LEFT SIDE COVER
1. Install:
• dowel pins 1
• camshaft sprocket cover gasket 2
5 - 23
ENG
L LLL L L LLL L L LLL L LLL
New
10 Nm (1.0 m • kg, 7.2 ft • lb)
New