Yamaha Star XVS13AA(C) 2011 Service Manual page 85

CABLE ROUTING (for XVS13AA(C)/XVS13CTA(C))
1. Wire harness
2. Front right turn signal/position light lead
3. Front left turn signal/position light lead
4. Main switch couplers
5. Front turn signal/position light couplers
6. Meter assembly couplers
7. Air temperature sensor lead
8. Meter assembly lead
9. Main switch lead
10. Air temperature sensor
11. Front turn signal/position light leads
A. Route the main switch lead that branches off from
the wire harness behind the other leads.
B. Route the meter assembly lead that branches off
from the wire harness in front of the meter
assembly couplers and front turn signal/position
light couplers, and then wrap the protective
covering around the lead and couplers.
C. Fasten the wire harness, front turn signal/position
light leads, meter assembly lead, and air
temperature sensor lead with the plastic band.
Align the red tape on the wire harness, the gray
tape on the front turn signal/position light leads,
and the white tape on the meter assembly lead
with the plastic band.
D. Route the main switch lead behind the wire
harness and meter assembly lead.
E. Fasten the main switch lead at the white tape to
the plastic band bracket with a plastic locking tie.
F. Wrap the protective covering around the main
switch couplers.
2-58