Yamaha Star XVS13AA(C) 2011 Service Manual page 432

EAS27260
TROUBLESHOOTING (XVS13AA(C)/XVS13CTA(C))
Any of the following fail to light: headlight, high beam indicator light, taillight, license plate light, position
light, meter light or accessory light (OPTION).
TIP
• Before troubleshooting, remove the following part(s):
1. Rider seat
2. Tool kit tray
3. Fuel tank
4. Headlight lens unit
1. Check the condition of each bulb
and bulb socket.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
8-98.
OK ↓
2. Check the fuses.
(Main, headlight, signaling system,
ignition and taillight)
Refer to "CHECKING THE FUS-
ES" on page 8-99.
OK ↓
3. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-100.
OK ↓
4. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-93.
OK ↓
5. Check the dimmer switch.
Refer to "CHECKING THE
SWITCHES" on page 8-93.
OK ↓
6. Check the headlight relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-103.
OK ↓
NG →
Replace the bulb(s) and bulb socket(s).
NG →
Replace the fuse(s).
NG →
• Clean the battery terminals.
• Recharge or replace the battery.
NG →
Replace the main switch.
NG →
The dimmer switch is faulty. Replace the
left handlebar switch.
NG →
Replace the headlight relay.
8-25
LIGHTING SYSTEM