Leica 3D Disto User Manual page 37

1.800.561.8187 3D Disto, Operation
Step Description

While targeting, ensure the laser beam is not split along corners or edges.
011133_001
2.
Press to measure.
3. Target the second point as described in the previous steps.
A line is displayed from the first to the second measured point.
4.
Proceed as described for measuring further points or use
the polygon.

In special situations the proposed line is not available. Polygons can also be
closed and results created by drawing a line with the stylus between the two
points to be connected.
www.
information@itm.com
.com
to close/finish
37