Export And Import Of Data - Leica 3D Disto User Manual

Photo and Secure
Points Administra-
tion
3.6.2
Data Export
Step-by-Step
Data Import
Step-by-Step
1.800.561.8187 3D Disto, Instrument Setup
Key Function
Data export. Refer to "3.6.2 Export and Import of Data".
Rename file or folder
Clear a selected file or folder.
Photos and Secure Points are stored in separate folders.

Export and Import of Data

Step Description

Export applies the distance unit setting to exported coordinates. This setting
can be modified any time before an export is executed.

The import/export settings in the menu allow to set the coordinates of the
first measured point of each application. This setting must be done before
the first point in a new project (e. g. a new scan) is measured; the setting
does not apply retrospectively.
1. Open File Manager, choose a folder or file and press
A key press on
• DXF and DWG files: 2D, 3D, scale 1:1
• CSV file: editable, common tabular data format
• TXT file: all results in editable ASCII format. Same content like CSV file
• JPG files of photos and Secure Points.
2. Export data is transferred to the Export folder in the directory My Docu-
ments\Leica Geosystems\3D Disto on your PC.
Step Description

It is possible to import DXF files or table formats for some applications.

Data should be prepared on the PC before importing. Only points are
imported, no lines. Remove irrelevant data such as frames, logos, coordi-
nates, or orientation arrows in the DXF files before importing them.
1. To access the Import folder, click on the 3D Disto Data icon on your desktop.
2. Copy the CSV or DXF files to the Import folder.
3. Refer to "6.3 Projector" for more information.
www.
generates a package of export files:
information@itm.com
.com
.
30