Leica 3D Disto User Manual page 42

1.800.561.8187 3D Disto, Software Applications
Step Description
Vertical Line Scan:
• Up (360°)
• Point-to point
• Down (360°)
Slope Scan:
Pointfinder opens.
Target scan end and press
Pop-up window prompts to define spacing of the measurement.
6.
Choose an interval and press OK or go to the rightmost position to enter indi-
vidual intervals.

For best scan results do not choose small intervals at long distances.
7. Press OK.
Scan starts.

Toolbar changes.
Press to start the camera. Press again to unlock.
Press to change scan spacing, skip the rest of the scan, continue scan, or
cancel scan.
Press to skip a scan point that you do not need or that causes problems.
8. If scan is finished pop-up prompts Ready. Edit Scan? Yes/No.
9. If Yes: New Toolbar appears, e.g. to measure missing points with DIST or
delete unneeded points with Trash key Symbol.

Press or
Press to start a scan simplification that automatically clears aligned
points.
Press to finish the scan.
www.
.
to select points.
.com
information@itm.com
42