Rm100 Remote Control; Power Supply - Leica 3D Disto User Manual

Hide thumbs Also See for Leica 3D Disto:
Table of Contents

Advertisement

2.3.2
Remote Control
Components
Navigation Buttons
2.4
First-time Use /
Charging Batteries
Operation /
Discharging
1.800.561.8187
3D Disto, Description of the System

RM100 Remote Control

a
b
c
d
e
1 0 0
R M
010737_001
The RM100 Remote Control has five buttons that allow turning the 3D Disto and
executing a distance measurement or point projection, depending on the application
program running.
The RM100 Remote Control does not support the Tool Kit applications.
Targeting Procedure
1) Rough targeting: hold
pressed.
2) Fine targeting: short tap on
steps.
3) Measure: Press
.

Power Supply

• The battery must be charged prior to using it for the first time because it is deliv-
ered with an energy content as low as possible.
• The permissible temperature range for charging is between 0°C to +40°C/ +32°F to
+104°F. For optimal charging, we recommend charging the batteries at a low
ambient temperature of +10°C to +20°C/+50°F to +68°F if possible.
• It is normal for the battery to become warm during charging. Using the chargers
recommended by Leica Geosystems, it is not possible to charge the battery if the
temperature is too high.
• For new batteries or batteries that have been stored for a long time (> three
months), it is effectual to make only one charge/discharge cycle.
• For Li-Ion batteries, a single discharging and charging cycle is sufficient. We recom-
mend carrying out the process when the battery capacity indicated on the charger
or on a Leica Geosystems product deviates significantly from the actual battery
capacity available.
• Batteries can operate from -10°C to +50°C/14°F to +122°F.
• Low operating temperatures reduce the capacity that can be drawn; high operating
temperatures reduce the service life of the battery.
www.
a) Key ring
b) Battery compartment
c) DIST button
d) Navigation buttons:
Up/Down/Right/Left
e) Control LED
/
/
/
to turn the 3D Disto as long as key is
/
/
/
to turn the 3D Disto by small single
information@itm.com
.com
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents