Leica 3D Disto User Manual page 17

LEDs and Buttons
LDM Laser
1.800.561.8187 3D Disto, Description of the System
Button/LEDs
ON/OFF button
010732_001
LEDs for 3D Disto status
010731_001
LED for battery status
010733_001
Status of Laser Beam Description
OFF
ON
Flashing
010734_001
www.
Description
Button to turn instrument ON or OFF.
Instrument turns OFF after 15 minutes if not connected
to the PC.
• Green and orange LEDs light up continuously: 3D Disto
is booting.
• Orange LED flashes: Self-levelling procedure is running
or tilt > 3°.
• Green LED flashes: 3D Disto is ready for measurement.
Tilt sensor is on.
• Orange LED lights up continuously: An error occurred.
Refer to "7 Error Messages".
• Green and orange LEDs light up continuously: Press the
ON button to reset the instrument.
For experts only: Tilt sensor off
Green LED flashes once; orange LED three times.
If instrument is on and connected to the charger:
• Green LED flashes 1x: Battery is charged to 25%.
• Green LED flashes 2x: Battery is charged to 50%.
• Green LED flashes 3x: Battery is charged to 75%.
• Green LED is on: Battery is fully charged.
Pointfinder is OFF or 3D Disto targets automatically.
Pointfinder is ON or user is targeting by Remote Control.
To indicate the precise position of a projected point.
.com
information@itm.com
17