Tool Kit; Comfort Plumbing - Leica 3D Disto User Manual

Location Check
step-by-step
6.5
General
6.5.1
Description
1.800.561.8187 3D Disto, Software Applications
If the 3D Disto was unintentionally moved, for example got bumped, the geometry of
the measured points will no longer fit with that of the previously measured points.
Start a Location Check to sustain the current accuracy/geometry.
Step Description
1. To initiate a Location Check press Menu » Applications » Location » Check
Location.
2.
If Secure Points are available, select Secure Point and press
The 3D Disto will target the Secure Point automatically.
3.
Check laser point position with target mark.

If the laser point does not target the centre of the target mark, a relo-
cation is recommended.
4. Proceed that way for checking further points.
5.
Press to close Secure Point gallery.

Tool Kit

In addition to the standard applications this program features:

• Comfort Plumbing,

• Comfort Targeting,
• Comfort Level,
• Meter Mark,
• Height Tracking, and
• Parallel Line.
After each layout task the respective tool has to be restarted. A pop-up offers to
continue with the same reference or to measure a new one. Data is not stored and
cannot be imported or exported. Remote Control functionality is not supported in
these applications.
Comfort Plumbing
Comfort Plumbing allows plumbing any point up or down without standing above it.
010899_001
www.
information@itm.com
.com
.
57