Leica 3D Disto User Manual page 33

Areas
References
Tilt Sensor
Secure Points
1.800.561.8187 3D Disto, Technical Terms and Abbreviations
a
b
010869_001
+3.00
+2.10
a
0.00
0.00
-0.02
0.00
010870_001
a
010871_001
The tilt sensor guarantees correct results even if the 3D Disto is not set up horizon-
tally.
010876_001
Tilt sensor off = disabled
All measurement results relate to the tilted
axis and horizon of the 3D Disto.
Secure Points link measurements to a coordinate system. These reference points
allow changing the 3D Disto location or continuing measurements at a later time, so
that all measurements fit together perfectly.
010873_001

Refer to "6.4 Location" for more information.
www.
a) Tilted area, as measured
b) Horizontal area, calculated by 3D Disto
a) Reference height:
A level that all heights refer to.
a) Reference axis/line:
A line that all dimensions refer to.
010877_001
Tilt sensor on = enabled
All measurement results relate to the
horizontal axis and horizon if the 3D
Disto is set up between 0° and 3°.
information@itm.com
.com
0-3°
33