Leica 3D Disto User Manual page 53

Design Adjustment
1.800.561.8187 3D Disto, Software Applications
Step Description

Use the key at any time to go back to Point Design.
1. Aligner opens.
2. The point design is now displayed in the working area and must be moved to
the desired position. Use the following tools:

The grid can be moved up, down, left, and right on the screen in small steps
using / /
The perpendicular distance from a selected grid point to a reference line is
displayed. Tap on this distance to enter a value.
Press to reset the grid position.
Press to align grid parallel to a selected line.

Lines between design points can be drawn on the screen if necessary
before use of the Parallel tool.
Press to turn the grid by 90°.
Press to place the grid exactly on a reference point.
3.
Press to proceed.
www.
/ .
information@itm.com
.com
53