Measurement Workflow - Leica 3D Disto User Manual

5.3
Measurements
step-by-step
1.800.561.8187 3D Disto, Operation
Toolbar description
Key Function
Press to zoom in or out.
Press to adjust the brightness of the camera.
Press to display/hide all measured points.
Press to measure hidden points.
Select an offset tool in the pop-up:
• Vertical offset: Measure one point on any vertical target.
• Individual offset: Measure two points on a pole or other hardware.
• Offset ruler: Measure two points on the 3D Disto offset point ruler.
An assistant leads through the workflow.
Press to take pictures for documentation purposes.
Press in dark conditions to change Pointfinder picture to edge mode.
Edges and corners will be highlighted in black.
Press to choose between different turn commands:
• Turn 90° right
• Turn 90° left
• Turn ?°: Enter the horizontal angle by which the 3D Disto should
turn.
• Horizon: 3D Disto goes to 0% slope in horizontal position.
• Plumb up: This option can be used to plumb up a point by setting
up the 3D Disto exactly over it. Use the 90° markings on the 3D
Disto socket for centring.

Measurement Workflow

Step Description
1.
To target the first point, for example a corner, press
keys or another method as described in "5.2 Pointfinder", to move the laser
point to the desired position.
www.
information@itm.com
.com
and use the arrow
36