Leica 3D Disto User Manual page 22

Operating Principles
for the Sketch View
1.800.561.8187 3D Disto, Description of the System
Selecting or Drawing Items

Ensure, that the navigation tools are deactivated.
To select a point or line in the sketch, click with the mouse or tap with one finger.
To draw a line, select a point with mouse, stylus or finger, slide to the desired point
and release.
Adjusting the Sketch View with Navigation Tools
Use the navigation tools to adjust the sketch view individually.
• Zoom by drawing a rectangular area
• Zoom
• Fit the whole model into the view
• Pan the sketch
• Rotate the sketch
• Change the perspective
To activate a navigation tool, click or tap on it.
cursor changes.
To deactivate a tool, click or tap on it again.
Adjusting the Sketch View with the Navigation Cube
You can also use the navigation cube to adjust the sketch view.
Click and drag the cube to adjust the view individually.
Click on a face, a corner or an edge of the cube for pre-defined views.
011137_001
Gestures for Touch-Screen
If your device has a touch screen, you can use two-finger gestures for quickly adjusting
the sketch view without using the navigation tools:
Swipe:
011136_001
Rotate:
009111_001
www.
The selected tool is highlighted and the
Zoom in:
Zoom out:
information@itm.com
.com
009108_001
009110_001
22